Dr. David Mills [enDr. David Mills is a native English speaker.]

Engineer

Dr. David Mills
Header-Image of Dr. David Mills - Dr. David Mills - Pneumatic Conveying Consultant

Please Log In

cancel

+44 1227 732493+44 1227 732504

Dr. David Mills - Pneumatic Conveying Consultant

Last updated: Jul 28, 2014

About David Mills

David Mills graduated in 1961 from Woolwich Polytechnic in London with a first class honours degree in Mechanical Engineering. He first worked in indus-try as a nuclear engineer with Atomic Power Constructions Ltd and then in academia as a thermodynamicist at Thames Polytechnic, specialising in heat and mass transfer. He has since gained some 30 years experience in Pneumatic Conveying, through consultancy, research and teaching. He undertook a PhD programme on Pneumatic Conveying in 1973 and has been working in this area ever since, first at the University of Greenwich in London, then as Professor of Bulk Solids Handling at Glasgow Caledonian University in Scotland. Since 1997 he has been operating as an independent consultant. He has written about 200 articles for technical journals and conferences, and has presented short courses and undertaken consultancy on a worldwide basis. He is author of the ‘Pneumatic Conveying Design Guide’ (SI units) and the ‘Handbook of Pneumatic Conveying Engineering’ (US units), both published in 2004.

Publications
1. Handbook of Pneumatic Conveying Engineering’, 2004
2. Pneumatic Conveying Design Guide , 2004

Personal

Professional Experience 58 Years / 3 MonthDr. David Mills has 58 years and 3 month professional experience in 4 different positions.

  • 2007/12 - today (11 Years / 4 Month)
    Engineer (Full-time employee)Dr. David Mills works for Dr. David Mills - Pneumatic Conveying Consultant as Engineer since December 2007.

    Dr. David Mills - Pneumatic Conveying Consultant

  • 1997/01 - today (22 Years / 3 Month)
    Pneumatic Conveying Consultant (Full-time employee)Dr. David Mills works for David Mills as Pneumatic Conveying Consultant since January 1997.

    David Mills

  • 1980/01 - 1997/01 (17 Years / 0 Month)
    Thermodynamicist (Full-time employee)Dr. David Mills worked for Thames Polytechnic as Thermodynamicist from January 1980 to January 1997.

    Thames Polytechnic

  • 1961/01 - 1980/01 (19 Years / 0 Month)
    Engineer (Full-time employee)Dr. David Mills worked for Atomic Power Constructions Ltd. as Engineer from January 1961 to January 1980.

    Atomic Power Constructions Ltd.

Publications 7Dr. David Mills wrote 7 publications

  • Some Aspects of Bend Erosion in Pneumatic Conveying System Pipelines [Some Aspects of Bend Erosion in Pneumatic Conveying System Pipelines was written by Dr. David Mills in Englishen]

    at: Bulk Solids Handling Vol:5 Num:5 Page:1085

    Clausthal-Zellerfeld, Germany, 1985/01 (34 Years / 3 Month ago)

  • A Comparison of the Performance of Top and Bottom Discharge Blow Tank Systems [A Comparison of the Performance of Top and Bottom Discharge Blow Tank Systems was written by Dr. David Mills in Englishen]

    at: Bulk Solids Handling Vol:7 Num:5 Page:701

    Clausthal-Zellerfeld, Germany, 1987/01 (32 Years / 3 Month ago)

  • Product Classification for Pneumatic Conveying [Product Classification for Pneumatic Conveying was written by Dr. David Mills in Englishen]

    at: Powder Handling & Processing Vol:2 Num:2 Page:117

    Germany, 1990/01 (29 Years / 3 Month ago)

  • Investigation into the Influence of Gas Density on Pneumatic Conveying Perfomance [Investigation into the Influence of Gas Density on Pneumatic Conveying Perfomance was written by Dr. David Mills in Englishen]

    at: Powder Handling & Processing Vol:6 Num:2 Page:157

    Germany, 1994/01 (25 Years / 3 Month ago)

  • The Influence of Conveying Distance on Low Velocity Pneumatic Conveying of Fly-Ash [The Influence of Conveying Distance on Low Velocity Pneumatic Conveying of Fly-Ash was written by Dr. David Mills in Englishen]

    at: Powder Handling & Processing Vol:11 Num:1 Page:57

    Germany, 1999/01 (20 Years / 3 Month ago)

  • The Influence of Particle Size Range on the Pneumatic Conveying of Fly-Ash [The Influence of Particle Size Range on the Pneumatic Conveying of Fly-Ash was written by Dr. David Mills in Englishen]

    at: Powder Handling & Processing Vol:11 Num:2 Page:197

    Germany, 1999/01 (20 Years / 3 Month ago)

  • The Influence of Material Grade on Pneumatic Conveying System Performance [The Influence of Material Grade on Pneumatic Conveying System Performance was written by Dr. David Mills in Englishen]

    at: Powder Handling & Processing Vol:12 Num:3 Page:239-246

    Germany, 2000/01 (19 Years / 3 Month ago)

Other persons in the powder and bulk community